HABERLE COLD SAW - Products - Blanking Systems

Shopping

HABERLE COLD SAW #100-0528

HABERLE Model S 225: HSS Saw Blade (9") 225x32mm/ Powerful saw for sites, installation and work bench. Cuts small tubes and profiles of steel, stainless steel and nonferrous metals.

Safety Sawblade Guard

Swing guided double guard of cast aluminum, covers the sawblade totally in rest position. Moving the saw head, the guard opens in the cutting area only, for best operator's safety. Quick release lift-up system to change the sawblade.

Drive Gears

Precision worm & wheel drive: Hardened and ground worm shaft. Strong main spindle runs in oil, free of maintenance. Special bronze wheel for long life. Available with standard or reduced speeds.

Available Motors & Electric

60 Hz Cycle: 1 -phase 1 -speed motor 110 V, 1.2 kW (1.5 HP)

Sawblade Speeds

60 Hz Cycle: 66 RPM or 66/132 RPM for steel & nonferrous metals.
Reduced speeds: 50 RPM or 50/100 RPM, allows also stainless steel.

Vise System

Standard with single mechanical vise. Strong buttress Ø 27 x 4 mm (1.2"). Optional: double-.grip vise with replaceable jaw plates, allows burr-free straight cuts and profiled jaws for special applications. Maximum clamping range with jaw plates in place: 80 x 60 mm (3.1 x 2.4").

Cutting Range mm (Inches)

with sawblade Ø 225 mm sawblade flange Ø 70 mm

Round tube	70(2.7") 90°	65(2.5") 45°	55(2.2") 30° acute
Square tube	60x60(2.5") 90°	60x60(2.5") 45°	50x50(2") 30° acute
Section	80x60(3"x2.5") 90°	70x50(2.7"x2")45°	100x50(4"x2") 90°
Steel bar Alum bar	40(1.75") mild steel and nonferrous metals only

HSS Sawblade

Ø 225 x 2 x 32 mm (9"), with 2 drive holes Ø 8 mm, cycle Ø 45 mm. A sawblades flange of Ø 70 mm allows the maximum cutting depth.

Machine Table, Pivot Bearing

Mitering table allows acute mitering to the left within 60°. Engraved 1° graduation, with quick stop bolt at 45°, strong clamp bolt M12 (1/2"). In any position, the work-piece is supported on both sides close to the sawblade. Large double yoke pivot system with 100 mm (3.9") bearing length and cast iron base care for high stability.

Innovative Sawblade Lubrication

Patented mechanical low-consumption lubrication system, specially designed to use the machine on sites and installation, cares for permanent oil supply to the sawblade without any air or electric power. A brush besides the sawblade applies pure cutting oil out of an oil cell. When starting to work, this cell has to be filled up with oil out of the 500 ccm tank by the hand operated oil pump placed on the tank. The oil cell and the capillary hose to the tank care for permanent oil lubrication for hours. Only very little oil is used, the tank volume will last for more than 100 hours of operation. Machine, chips, material and workbench remain dry and clean. English instruction label on the tank. HABERLE S 2000 Metal Cutting Oil Biodegradable oil for metal cutting operations, free from mineral oils or any harmful substances, ensures a long tool life. Extremely high lubricating power leads to very poor warm up, water cooling is not necessary. S 2000 also can be used as screw-cutting oil on pipes and for other metal processing, for pure application, best for all metals.

Dimensions & Weights

Table machine with handle: 650 x 300 x 720 mm, 48kg (110 lb.)

Standard Equipment

Instruction manual in English with parts list, operating wrenches, single vise, mechanical oil lubrication system, 1 bottle with 1000 ccm HABERLE S 2000 cutting oil.

Optional Equipment

Double-grip vise with jaw plates set, sawblade, cutting oil, fabricated steel stand, small length stop 1 meter (40"), graduated length stops.